Selection know-how written as decision conditions and failure signals — how to choose a construction, and how to tell the choice was wrong.
Six conditions that decide between paper and film label stock: moisture, oil, squeezing, abrasion, print process and shelf life — each with its failure signal.
Read the guide →
Direct thermal or thermal transfer: how long the print must survive, and how much friction it takes. Plus the failure signals of each.
Read the guide →
Six causes of label lifting on curved or squeezable bottles, each with the construction change that addresses it.
Read the guide →
What low surface energy means in practice, why standard water-based adhesives bead on HDPE, and the construction features that hold.
Read the guide →
Freezing changes the problem twice: adhesion at application temperature and adhesion after freeze-thaw cycles. What must change in the construction for each.
Read the guide →
Removable adhesives remove cleanly only within a window of surface, time and temperature. What defines the window, and what signals that it has closed.
Read the guide →
Liner choice sets die-cutting behavior, dispensing speed and the no-label look. Glassine and PET liners compared with their failure signals.
Read the guide →
Where synthetic paper sits between paper and film, and the one-line differences between PP, PE and PET for labeling decisions.
Read the guide →
Heat attacks labels twice — at filling, and for the product's whole life. What changes at each stage, and the signals of an adhesive past its limit.
Read the guide →
A self-adhesive price is four components plus quantity logic. Knowing which component moves the number makes quotations negotiable.
Read the guide →